Easy Guide to Repair/ Change IMEI Of Your MTK / Android Smartphone and Devices (Without PC)

Repair or Changing the IMEI of your
MTK / Android is now possible, this
includes for MTK 6577 / 6575 android devices, e.g:- Tecno, Gionee, Infinix,
and few others, and this post will
show you how to do it using Mobile
Uncle Tools.

NOTE
1. This tweak was initiated for the
main purpose of educating our
readers, we will Not be held
responsible if this info is used for any
illegal activity.

2. We reserve the right that if you get your device bricked during the
process stated below, We won’t be
held responsible for any Damages.
Meanwhile this post should be useful if
your MTK phone is having problem
registering your SIM to your network.
Probably due to change of location.
That’s by the way, but we assure
damaging your device during
procedure is nothing to worry about,
you’ll get it successfully done within
seconds if you follow the Steps below
carefully:

REQUIREMENTS For changing/Fixing the IMEI number on your MTK android :

1. A valid IMEI number

2. The MTK Engineering Mode from playstore.

Note
Note that when you use IMEI number
of your old unused mobile phone, be
sure to never insert a SIM of same
network again.
i.e >> If you use a Glo sim on a
Blackberry (or any other phone), after you copied and use the Blackerry’s
IMEI into your Android, your Glo will
work fine on your Android. But be
sure not to insert that same Glo SIM
into the Blackberry again, If you do
and switch it on, the sim will not register to the network.
After getting the above ready, follow
the Procedures below:

1. Dial *#06#, write down your Default IMEI.

2. Open the app and choose MTK Setting 

3. Swipe to the right and choose CDS Information

4. CLICK >> Radio Information .
You’ll see something like:

Phone1 –

Phone2 –

In that select Phone2, because in most
of these Chinese cloned phone, the 1st
Sim which is a 3G will work perfectly.

Problem only happens when we insert
the second sim. Such cases are
experienced if after you check, you can see the IMEI of 1st sim starting
with 35xxxxx and the 2nd will start
with 88xxxxxxxx. That is why the
second sim is not able to register to
the network, because its not in
international formatted IMEI. So usually we need to change the IMEI of
Phone 2.

When you select any of Phone1 or
Phone2 – you’ll find AT+ 
Enter the following command there 
A T+EGMR =1,7,“IMEI_UMBER”

Inside the quote , input your new IMEI
number,
click >> SEND AT COMMAND
Note : 1,7 is for Phone 1 
1,10 is for Phone 2
That’s all!

Posted via Blogaway